physxCAPI/physxCDLL/include/extensions/PxPrismaticJoint.h

// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//  * Redistributions of source code must retain the above copyright
//    notice, this list of conditions and the following disclaimer.
//  * Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the
//    documentation and/or other materials provided with the distribution.
//  * Neither the name of NVIDIA CORPORATION nor the names of its
//    contributors may be used to endorse or promote products derived
//    from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
// CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
// OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Copyright (c) 2008-2023 NVIDIA Corporation. All rights reserved.
// Copyright (c) 2004-2008 AGEIA Technologies, Inc. All rights reserved.
// Copyright (c) 2001-2004 NovodeX AG. All rights reserved.  

#ifndef PX_PRISMATIC_JOINT_H
#define PX_PRISMATIC_JOINT_H
/** \addtogroup extensions
  @{
*/

#include "extensions/PxJoint.h"
#include "extensions/PxJointLimit.h"

#if !PX_DOXYGEN
namespace physx
{
#endif

class PxPrismaticJoint;

/**
\brief Create a prismatic joint.

 \param[in] physics		The physics SDK
 \param[in] actor0		An actor to which the joint is attached. NULL may be used to attach the joint to a specific point in the world frame
 \param[in] localFrame0	The position and orientation of the joint relative to actor0
 \param[in] actor1		An actor to which the joint is attached. NULL may be used to attach the joint to a specific point in the world frame
 \param[in] localFrame1	The position and orientation of the joint relative to actor1 

@see PxPrismaticJoint
*/
PxPrismaticJoint*	PxPrismaticJointCreate(PxPhysics& physics, PxRigidActor* actor0, const PxTransform& localFrame0, PxRigidActor* actor1, const PxTransform& localFrame1);


/**
\brief Flags specific to the prismatic joint.

@see PxPrismaticJoint
*/
struct PxPrismaticJointFlag
{
	enum Enum
	{
		eLIMIT_ENABLED	= 1<<1
	};
};

typedef PxFlags<PxPrismaticJointFlag::Enum, PxU16> PxPrismaticJointFlags;
PX_FLAGS_OPERATORS(PxPrismaticJointFlag::Enum, PxU16)

/**
 \brief A prismatic joint permits relative translational movement between two bodies along
 an axis, but no relative rotational movement.

 the axis on each body is defined as the line containing the origin of the joint frame and
 extending along the x-axis of that frame

 \image html prismJoint.png

 @see PxPrismaticJointCreate() PxJoint
*/
class PxPrismaticJoint : public PxJoint
{
public:
	
	/** 
	\brief returns the displacement of the joint along its axis.
	*/
	virtual PxReal			getPosition()	const	= 0;

	/** 
	\brief returns the velocity of the joint along its axis
	*/
	virtual PxReal			getVelocity()	const	= 0;

	/**
	\brief sets the joint limit  parameters.

	The limit range is [-PX_MAX_F32, PX_MAX_F32], but note that the width of the limit (upper-lower) must also be
	a valid float.

	@see PxJointLinearLimitPair getLimit()
	*/
	virtual void			setLimit(const PxJointLinearLimitPair&)		= 0;

	/**
	\brief gets the joint limit  parameters.

	@see PxJointLinearLimit getLimit()
	*/
	virtual PxJointLinearLimitPair getLimit()	const	= 0;

	/**
	\brief Set the flags specific to the Prismatic Joint.

	<b>Default</b> PxPrismaticJointFlags(0)

	\param[in] flags The joint flags.

	@see PxPrismaticJointFlag setFlag() getFlags()
	*/
	virtual void					setPrismaticJointFlags(PxPrismaticJointFlags flags) = 0;

	/**
	\brief Set a single flag specific to a Prismatic Joint to true or false.

	\param[in] flag		The flag to set or clear.
	\param[in] value	The value to which to set the flag

	@see PxPrismaticJointFlag, getFlags() setFlags()
	*/
	virtual void					setPrismaticJointFlag(PxPrismaticJointFlag::Enum flag, bool value) = 0;

	/**
	\brief Get the flags specific to the Prismatic Joint.

	\return the joint flags

	@see PxPrismaticJoint::flags, PxPrismaticJointFlag setFlag() setFlags()
	*/
	virtual PxPrismaticJointFlags	getPrismaticJointFlags()	const	= 0;

	/**
	\brief Set the linear tolerance threshold for projection.

	If the joint separates by more than this distance along its locked degrees of freedom, the solver 
	will move the bodies to close the distance. 

	Setting a very small tolerance may result in simulation jitter or other artifacts.

	Sometimes it is not possible to project (for example when the joints form a cycle).

	This value must be nonnegative.

	<b>Range:</b> [0, PX_MAX_F32)<br>
	<b>Default:</b> 1e10f

	\param[in] tolerance the linear tolerance threshold

	@see getProjectionLinearTolerance()

	@deprecated
	*/
	PX_DEPRECATED	virtual void			setProjectionLinearTolerance(PxReal tolerance)	= 0;

	/**
	\brief Get the linear tolerance threshold for projection.

	\return the linear tolerance threshold in radians

	@see setProjectionLinearTolerance()

	@deprecated
	*/
	PX_DEPRECATED	virtual PxReal			getProjectionLinearTolerance()	const	= 0;

	/**
	\brief Set the angular tolerance threshold for projection. Projection is enabled if PxConstraintFlag::ePROJECTION
	is set for the joint.

	If the joint separates by more than this distance along its locked degrees of freedom, the solver 
	will move the bodies to close the distance.

	Setting a very small tolerance may result in simulation jitter or other artifacts.

	Sometimes it is not possible to project (for example when the joints form a cycle).

	<b>Range:</b> [0, PX_MAX_F32)<br>
	<b>Default:</b> Pi

	\param[in] tolerance the linear tolerance threshold

	@see getProjectionLinearTolerance() PxJoint::setConstraintFlags()

	@deprecated
	*/
	PX_DEPRECATED	virtual void			setProjectionAngularTolerance(PxReal tolerance)	= 0;

	/**
	\brief Get the angular tolerance threshold for projection.

	@see getProjectionAngularTolerance()

	@deprecated
	*/
	PX_DEPRECATED	virtual PxReal			getProjectionAngularTolerance()	const	= 0;

	/**
	\brief Returns string name of PxPrismaticJoint, used for serialization
	*/
	virtual	const char*		getConcreteTypeName() const { return "PxPrismaticJoint"; }

protected:
	//serialization
	
	/**
	\brief Constructor
	*/
	PX_INLINE				PxPrismaticJoint(PxType concreteType, PxBaseFlags baseFlags) : PxJoint(concreteType, baseFlags) {}

	/**
	\brief Deserialization constructor
	*/		
	PX_INLINE				PxPrismaticJoint(PxBaseFlags baseFlags) : PxJoint(baseFlags) {}
	
	/**
	\brief Returns whether a given type name matches with the type of this instance
	*/
	virtual	bool			isKindOf(const char* name) const {	return !::strcmp("PxPrismaticJoint", name) || PxJoint::isKindOf(name); }
	
	//~serialization
};

#if !PX_DOXYGEN
} // namespace physx
#endif

/** @} */
#endif